转型发展形势下的转炉炼钢科技进步

来源 :2016年全国炼钢-连铸生产技术会 | 被引量 : 0次 | 上传用户:kelly2457
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  本文对中国钢铁工业转型发展时期需重点关注的转炉炼钢工艺技术进行了分析论述,认为:(1)较低底吹搅拌强度的复吹转炉应将底吹元件减少至4~5 支,并采取根据钢水碳氧积对底吹元件“动态维护”等措施,提高金属熔池实际搅拌效果,而大量生产低碳、超低碳钢品种的钢厂应将底搅强度逐步增加至0.15Nm3/min/t;(2)随钢铁工业去产能逐步深入,会有相当数量转炉富余、闲置,有条件钢厂应利用其进行铁水脱磷预处理,采用“脱磷转炉+脱碳转炉”先进炼钢工艺技术.
其他文献
  An overview is presented of research on the interactions between micro-organisms and mineral building materials(concrete and natural stone),performed at the
  According to the preferred109selection of the raw materials and the optimization of the mix proportioning,low viscosity C80-C100 high-and ultra-high-perform
  Corrosion of reinforcing steel in concrete structures is a major durability issue worldwide.For monitoring and diagnosis,non-destructive test methods have b
  The contribution starts with the theoretical and experimental background of the micro-ice-lens model.It summarises: 1)The surface physical aspects of a)non-
  Several properties of self-consolidating concrete(SCC)are affected by the thixotropic behavior of the material,including segregation resistance,lateral pres
  Chemical admixture is very useful for higher performance of concrete and production of high fluidity concrete and high strength concrete etc..In addtion,che
  钢厂属于流程制造业.本文通过对钢厂制造流程的内在特征的分析,阐述了对智能化钢厂的认识,指出流程型智能制造的物理系统要以动态-有序、协同-连续运行为导向优化流程结构,
  With the increased levels of interground limestone being used in certain types of cements,as well as the use of limestone fillers in concrete placed in sulf
  Tricalcium silicate(C3S)solid solutions known as alites are the principle phase of clinker,responsible for strength development.C3S exhibits a complex polym
会议