论文部分内容阅读
Study on Film Structure Design of CCAg Thermal Control Film
【机 构】
：
National Key Laboratory of Science and Technology on Surface Engineering,Lanzhou Institute of Physic
【出 处】
：
第四届国际表面与界面科学与工程学术会议(The Fourth International Conference on S
【发表日期】
：
2009年12期
其他文献
Anedic titanium oxidization (ATO) is a relatively simple technique that can be easily automated for preparing TiO2 nanotube arrays with high specific surface area.In the present work,we demonstrate th
Ti-W-N thin films were deposited by reactive RF sputtering with a W-Ti(30 at.%) target in an argon/nitrogen atmosphere.The nitrogen partial pressure ratio in the growth chamber was varied from 0 to 11
Porous anodic aluminum oxide (AAO) films were fabricated electrochemically in different preparation conditions such as in the mixed electrolytes with various volume ratios of 0.3M C2H2O4 and 0.3M H2SO
会议
Studies on the mixed vanadium oxide thin film deposited by RF magnetron sputtering and its applicati
会议
With the rapid development photovoltaic industry,crystallization techniques play an important role in silicon thin film solar cells.In this paper,several main crystallization technologies of amorphous
Ferromagnetic CoFe2O4 films were epitaxially deposited on different oxide single crystal substrates by laser molecular beam epitaxy (L-MBE).For heteroepitaxial growth of CoFe2O4 on (001)SrTiO3 substra
会议
The properties of ZnO thin film on Al2O3 substrate prepared by pulsed laser deposition under differe
ZnO thin films were prepared on c-plane sapphire (Al2O3) substrates using pulsed laser deposition at different substrate temperatures (200,300 and 400℃).The effects of substrate temperature on the str
Micro and nano-satellites with their low thermal capacitance are vulnerable to rapid temperature fluctuations.Therefore,thermal control becomes more important,but the limitations on mass and electrica
Diffractive Optical Element (DOE) can be used to simplify optical systems such as lightening its mass,reducing elements numbers and so on.In the paper,Laser Direct Writing Method was used to fabricate
Room temperature photoluminescence spectra were achieved from ZnO films post-treated in oxygen plasma with different time.Two emission lines centered at about 387nm and 522nm were observed.As a rule,t