软体机械手的建模与仿真

来源 :2014年全国固体力学学术大会 | 被引量 : 0次 | 上传用户:guigui1987
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  机械手臂作为一种不可或缺的机构,被广泛的应用于工业生产、医疗生物以及航空航天等众多工程领域。对于传统的机械手臂,由于其结构的刚硬性在处理一些脆弱物体(例如水果、人体器官等)时会破坏物体的原有形态,因而一种基于充气网络原理的软体机械手被广泛关注。
其他文献
压电材料由于其良好的电-机械耦合性,吸引了包括电子技术、海洋工程和机械工程等领域的广泛应用,被制造成电子脉冲探测器、声呐发射与接收器、超声转动装置等,是智能材料中主要的功能材料。压电材料主要包括压电晶体、压电陶瓷和压电复合材料。
会议
Asphalt-based particle-reinforced composites generally exhibit extremely complicated mechanical behavior,particularly present apparent time-dependent viscoelastic behavior.To fully understand each con
会议
表面效应在纳米尺度材料的研究中有着重要的地位。本文通过复变函数方法和级数展开法,对任意形状的纳米孔周的应力场(由表面效应诱发)进行了研究,并着重讨论了环向应力与孔边界曲率的关系。经过算例分析,发现最大的环向应力往往并非出现在边界孔的最大曲率点,而是在该点的附近。对于一些特定的椭圆孔和典型的非椭圆孔(三角形,正方形和矩形),在孔周曲率的最大点,环向应力甚至取极小值(而非极大值)。同时发现,虽然表面效
本文对处于随时间变化磁场中扁锥壳的热磁弹性的动态响应进行了研究,分析在机械载荷、电磁场和温度场耦合作用下扁锥壳的位移和应力动态响应行为。基于麦克斯韦方程和欧姆定律,导出了电磁场控制方程;基于焦耳热效应、热传导方程以及热平衡方程,导出温度场的控制方程;基于经典板壳非线性运动方程且考虑洛伦磁力和温度应力的耦合作用,导出扁锥壳的非线性热磁弹性控制方程。采用分离变量法对电磁场和温度场控制方程进行求解,采用
Large deformation of soft materials is harnessed to provide functions in the nascent field of soft machines.This paper describes a new class of systems enabled by highly stretchable,transparent,stable
会议
基于铁电材料电热效应的固体制冷器具有制冷效率高、环保、应用范围广等优点被认为是最具潜力的固体制冷器之一。然而,铁电材料仅在发生铁电-顺电相变的居里温度附近的较小温度范围内才具有巨电热效应,限制了铁电制冷的商业化应用。考虑到铁电薄膜中,应变可调控其居里温度;同时铁电材料的电畴结构对其性能有较大的影响。
会议
Based on nonlocal beam theories,the dynamic mechanical behavior of a simply supported Euler-Bernoulli nano-beam subjected to a moving force are studied in this paper.The governing equations of motion
Based on nonlocal beam theories,the dynamic behavior of a simply supported Euler-Bernoulli nanobeam subjected to a moving force are studied in this paper.The governing equations of motion for the dyna
This talk will focus on the behavior of suspension cells in response to mechanical stimuli like pressure shock and enforced oscillation.In particular,we show that a sudden increase/reduction in medium
会议
Based on surface elasticity theory,we analyzes the effects of surface stresses on nano-sized contact problem in an elastic half-plane which contains a cylindrical hole near the surface.Meanwhile,the e