【摘 要】
：
The Monte-Carlo ray-tracing method is applied and coupled with optical properties to predict radiation performance of dish solar concentrator/cavity receiver systems.The effects of sunshape and surfac
【机 构】
：
School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
论文部分内容阅读
The Monte-Carlo ray-tracing method is applied and coupled with optical properties to predict radiation performance of dish solar concentrator/cavity receiver systems.The effects of sunshape and surface slope error have been studied and the corresponding probability models are introduced in this paper.Taking into account the above-mentioned factors, we show that the directional features of the focal flux affect the radiation flux distribution of cavity receiver, present criteria for the characterization of directional attributes, and describe a method for their calculation.Based on the concept of equivalent radiation flux, an upside-down pear cavity receiver is proposed in view of directional attributes of focal flux.Receiver design and modelling guidelines are presented.The uniformity performance of the wall flux is compared with five traditional geometries.
其他文献
利用自行设计的高能机械化学球磨机成功地制备出了微纳米硅化钼粉体.实验采用8:1、12:1、15:1三种不同的球料比在1300r/min的转速来探索球磨条件对合成微纳米硅化钼反应的影响.通过X射线衍射仪和SEM检测分析进一步讨论了各种球磨条件对反应的影响.从机理上进一步进行了探讨,并给出了微纳米Mo-Si形成的机理模型.
本文以Sr2Mn3Sb2O2型层状化合物Sr2AO2M2Se2(A=Co,Mn;M=Cu,Ag)为研究对象,系统研究了化合物的结构类型,MX层中空位的形成特点及原因,并讨论了该类材料的磁性、电输运等物性.
The global climate cooling, from "greenhouse" to "icehouse", during Eocene-Oligocene Transition (EOT) is one of the great events during Cenozoic climate deterioration (Zachos et al., 2001; Lear et al.
采用三氟乙酸金属有机物沉积方法在不改变工艺条件下,在LaAlO3(001)衬底上制备了Y1-xHoxBa2Cu3O7-δ(x=0,0.1,0.2,0.3,0.4,0.5)薄膜.其中,Yo.6Hoo.4Ba2Cu3O7-δ的临界电流密度Jc最高,77K自场下是YBa2Cu3O7-δ的1.6倍.磁通钉扎类型并没有随Ho的替代而改变,依然为δl钉扎类型,是由于Y3+和Ho3+的离子半径相近的缘故.这种在
针对铸造用原材料石英砂、树脂砂、擦洗砂中二氧化硅分析方法对人体毒性大的不足,建立了研磨—熔融—XRF法,并对检测试样制备和检测数据处理做了详细的介绍.
在对古陶瓷的研究中,古陶瓷胎釉元素分析因能提供原料、产地、真伪等相关信息而备受关注.采用压片制样法,用PANalytical波长色散X射线荧光光谱仪对样品的Na2O、MgO、A12O3、SiO2、P2O5、K2O、CaO、Sc、TiO2、V2O5、Cr2O3、MnO、Fe2O3、CoO、NiO、CuO、ZnO、Ga、As、Br、Rb、Sr、Y、Zr、Nb、Sn、Sb、Cs、BaO、La、Ce、Nd
焊带是影响带极堆焊质量的关键因素.本文提出用X荧光光谱仪检测不锈钢焊带化学成分,除C、N外其他有成分要求的元素都可检测,方法简单,测量快速,制样方便.荧光测量数据与ICP结果或手工分析结果相比对也很理想,且具有在测量高含量常量元素时ICP所不具备的高精度和高稳定性.
采用熔融片制样法,用X射线荧光光谱仪(XRF)同时测定防辐射用重晶石中氧化钡和二氧化硅等主次组分的含量,用基本参数法校正基体效应,并进行了方法的精密度和准确度试验,各组分相对标准偏差RSD(n=10)小于6.0％.用标准物质进行验证,测量值与之基本一致.
使用标准加入法,建立了波长色散型XRF测定ppm级金属钌的分析方法.经与“碱熔—酸化分离—还原吸收”法分析结果和本法比对验证,结果准确、可靠,方法快速、简便.
Plate-like NaNbO3 particles were used as templates to fabricate grain-oriented 0.96(0.8Na0.5Bi0.5TiO3-0.2 K0.5Bi0.5TiO3)-0.04NaNbO3 (NKBT)ceramics.The effects of the sintering temperature and the soak