Reliability Analysis of Safety Related Ventilation System Fan of Nuclear Power Plant

来源 :第三届核电厂材料与安全可靠性国际研讨会 (3rd MRNPP Symposium) | 被引量 : 0次 | 上传用户:Lassie01
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Nuclear Power Plant ventilation system is the important system to NPP,among which safety related ventilation systems normal operation plays a key role in safety and reliable operation of NPP.Fans as power facilities have significant influence.Key components and failure modes affecting the reliability can be obtained by analyzing reliability of safety important ventilation system fans of NPP,which can be used to improve operation and maintenance strategy of NPP in operation and system reliability as well as provide support for system design and equipment optimization of new NPP.
其他文献
This paper introduces a new test model and data acquisition plan for evaluation of materials of thin-walled tubes of nuclear power plant.In analogy to crack growth rate measurements using compact tens
The microstructure and distribution of residual strains were investigated in the fusion boundary region of domestic low alloy steel SA-508Ⅲ weld joint using scanning electron microscope(SEM),electron
The water environment of pressurized water reactor is high pressure and high temperature,meanwhile,in order to protect steam generators,the water chemistry in the secondary loop of PWR is required to
会议
Crevice corrosion is one of the most common localized attacks,which always occurs within the occlude regions or under shielded metal surfaces.Materials relying on passive surface films for corrosion r
会议
To a large extent,the reliability of nuclear structures depends on the mechanical properties of the constituent materials which work at elevated temperatures under a high radiation environment.Usually
会议
Alloy 690 is widely used as steam generator heat transfer tube in PWR nuclear power plants.During the process of heat exchange,the thin tubes are subjected to vibration,i.e.,flow induced vibration.Man
会议
304 stainless steel,316L stainless steel and 316NG stainless steel are conventional materials of primary pipe in nuclear power plants.The present work is to summarize the acoustic emission(AE)characte
The electrochemical measurement is a promising method available to perform actual continuous in-situ monitoring of corrosion degradation in nuclear power plants.The tungsten/tungsten oxide electrode w
Electrochemical measurement electrode device for large scale facility service is developed.With start-up and shutdown process during verification test,304SS electrochemical corrosion potential(ECP)res
The micro-hardness of welded joint was measured,and the microstructure and fracture morphology of welded joints had been observed by using metallographic and scanning electron microscope(SEM).The resu