Kinetics of tritium release process in neutron-irradiated Li4SiO4

来源 :第13届中日双边先进能源系统和聚变裂变工程材料会议(CIS-13) | 被引量 : 0次 | 上传用户:jackyz
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Understanding the behavior of tritium release from ceramic breeder materials is important for the design of solid breeding blanket and tritium recovery system in a fusion reactor.In this study,the kinetics of tritium release process in neutron-irradiated Li4SiO4 ceramic pebbles was analyzed by diffusion,first and second order desorption models.In the isothermal annealing experiment at 600℃ under He+0.1%H2 purge gas,the tritium release rate could be reproduced well only by first order desorption model.The desorption activation energy was estimated to be~196 kJ/mol.
其他文献
China low activation martensitic(CLAM)steel is considered as a candidate structural material for the blankets in China Tokamak fusion reactor.In order to evaluate mechanical properties of the structur
Compared with cold forming,hot forming is more appropriate for the high-strength and low plasticity RAFM(reduced activation ferritic/martensitic)steels used in the fusion energy systems.It is importan
SiC/SiC composites are the promising materials for flow channel insert and structural material in advanced fusion reactors.In order to obtain large size composite parts,development of joining technolo
The corrosion tests in pure water at 150°C were performed to investigate the corrosion behavior of CuCrZr alloy at different dissolved oxygen content and different flow rate.The weight loss of the all
The creep deformation and rupture behavior of CLAM steel has been studied in this article.Creep test were carried out at 923K over a stress range of 90-140MPa.The microstructure of the deformation zon
Effect of the different types of precipitates and precipitation-dissolution behaviors on austenite grain growth in reduced activation ferritic/martensitic(RAFM)steel was studied by using metallography
Deposition of corrosion products increases radiation in primary coolant loops of reactor.Therefore,the deposition and migration behavior of corrosion products is examined in this experiment.Objective
In primary loop,corrosion products in coolant flow come from radioactive zone and deposit on equipment and piping to produce radiation field.Research to determine the behavior of corrosion products de
The deformation behaviors of China Low Activation Martensitic(CLAM)steel were investigated by the thermal simulation compression test on Gleeble-3500 thermal simulator,under experimental parameters th
High Cr ferrite/martensite steels are the primary candidate structural material used in first-wall of Test Blanket Module(TBM)for fusion reactor applications.In this paper,the influence of compressive