Optical design of Thomson scattering system for PSI-SCU

来源 :第13届中日双边先进能源系统和聚变裂变工程材料会议(CIS-13) | 被引量 : 0次 | 上传用户:puhongjin
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  High spatial and temporal resolution Thomson scattering diagnostic system can provide accurate profiles of plasma temperature and density,which play an important role in the study of linear plasma generators application and fusion system.So optical design for low temperature(0.1eV-1.5eV)Thomson scattering system of PSI-SCU linear plasma generator has been conducted in this paper.The measurement system will use a 50mW Nd:YAG laser at 523 nm,a collection optics system,and the detecting branch consisting of the spectrum system equipped with CCD camera base on an ”Generation Ⅱ” image intensifier.
其他文献
The flux-cored wires were prepared by changing the contents of RE elements from 0 to 1%in the cored components,respectively,which were designed for the gas-shielded welding of 10CrNi3MoV high strength
A plasma generator based on hollow cathode discharge(HCD)has been designed and installed on the linear magnetic device,for the researches on helium and hydrogen plasma interaction with plasma facing c
The transformation behavior of Nb–V–Ti microalloyed ultra-high strength steel during continuous cooling is investigated by Gleeble-1500 thermal mechanical simulator.Thermal dilation curves were measur
Liquid lithium as the coolant and the tritium breeder has the advantage of reducing radiation damage of tokamak structural materials,avoiding the production of helium bubble and thermal fatigue,reduci
Liquid lithuim,due to its large thermal shock resistance,high heat loads and radio-resistance to nutron irradiation,is perceived as a promising firstwall material in future fusion reactors[1].However,
Enhancement of hydrogen isotope retention in tungsten due to neutron irradiation is one of the most important issues for a future fusion device.In this study,properties of deuterium retention in recry
In a fusion reactor,the high heat flux of the plasma will lead to the first wall material damage.Impurities generated in damage process can have some impact on the normal of operation of the device.In
Liquid lithium was regarded as the candidate materials of the coolant.The liquid lithium of the strong corrosive may be corrosion the structural materials.In this study in order to provide some refere
In fusion reactor,the divertor is used to filter the helium ash produced in the reaction.Tungsten is a plausible candidate for divertor material in ITER,because it has a high melting,low sputtering yi
Molybdenum(Mo)is considered as the primary candidate of substrate materials for liquid lithium(Li)plasma-facing components(PFCs)in fusion devices,due to itssignificant advantages of corrosion resistan