论文部分内容阅读
一、切割胶皮垫圈工具无线电设备和仪表等在制造装配修理过程中,一些绝缘或密封处需要垫上一个胶皮垫圈,这些垫圈的大小尺寸往往又不一致,因此在加工这种零件时,一般都是先在原料上划上线再用剪刀或其他工具铰成所需样子,这样既费时间,质量也不好。采用图1的工具,可以切割各种不同尺寸的工件,不但效率高而且质量也好。用法如下:先按胶皮圈的厚度,向上下调节好割刀3,用螺钉1支紧,再按垫圈的半径调节刀刃与定位钉
First, the cutting rubber gasket tools Radio equipment and instruments in the manufacturing and assembly repair process, some insulation or sealing place need to pad a rubber gasket, the size of these washers often inconsistent, so in the processing of such parts, are generally the first Draw on the raw materials and then use scissors or other tools articulated the way you like, it takes time, quality is not good. With the tools in Figure 1, you can cut a wide range of workpieces of different sizes, not only with high efficiency but also with good quality. Usage is as follows: Press the thickness of the rubber apron, adjust the cutter up and down 3, with a screw 1 tighten, and then press the washer radius adjustment blade and positioning nails