austenitic相关论文
Effect of Laser Scanning and Aging Treatment on Microstructure and Property of Austenitic Heat-resis
In order to improve surface properties,High chromium austenitic base heat-resistant cast steel was scanned with a 5 kW c......
Effects of different alloying elements M(M=Fe,Ni,Mn,Si,Mo,Cu,Y)on Cr_(2)0_(3)with Cl:a first-princip
Using the first-principles methods,the effects of different alloying elements M(M=Fe,Ni,Mn,Si,Mo,Cu,Y)on Cr203with Cl ad......
EFFECTS OF MODIFICATION OF THE CARBIDE CHARACTERISTICS THROUGH GRAIN BOUNDARY SERRATION ON CREEP-FAT
Modification of the carbide characteristics through the grain boundary serration is investigated, using an AISI 316 and ......
Generally the methods of solution treatment of austenitic stainless steel are bifurcated on-line solution and off-line s......
Infuence of Plasma Nitrided on the Mechanical Properties on 316L Steel under Low Temperature Conditi
Surface modification of 316L austenitic stainless steel was performed by glow plasma nitriding at low temperature The su......
In order to use stainless steel as bipolar plate for PEMFC, electrochemical behavior of a high Cr and Ni austenitic stai......
Microstructural evolution and mechanical properties of friction stir-welded C71000 copper–nickel all
Dissimilar joints comprised of copper–nickel and steel alloys are a challenge for manufacturers in modern industries,as......
对常减压装置奥氏体不锈钢设备大面积发生腐蚀的问题，深入探讨了腐蚀机理，并提出了防护措施。......
ＭｏｄｉｆｙｉｎｇＥｆｅｃｔｏｆＲａｒｅＥａｒｔｈｓａｎｄＴｉｔａｎｉｕｍｏｎＡｕｓｔｅｎｉｔｉｃＭａｎｇａｎｅｓｅＳｔｅｌＺｈｕＲｕｉｆｕ（朱瑞富），ＬüＹｕｐｅｎｇ（吕宇鹏），ＬｉＳｈｉｔｏｎｇ（李士同）ＣｈａｏＺｈｉｑｉａｎｇ（朝志强），Ｗａ.........
Stress corrosion cracking behavior of 310S in supercritical water with different oxygen concentratio
The effect of dissolved oxygen(DO)on the stress corrosion cracking(SCC)of 310S in supercritical water was investigated u......
初步探索了奥氏体电焊条药皮颗粒度对焊缝加金属化学成分、结晶模式及微观组织的影响,选取药皮成分中大理石和部分铁合金开展了颗......
Precipitation of carbide and its effects on the properties of nickel-saving austenitic stainless ste
In this work,the effects of temperature and cooling rate on the precipitation of carbides in nickel-saving metastable au......
采用RDL50型蠕变持久试验机研究316Ti、347、HR3C和6XN四种奥氏体不锈钢和718、825、800H三种高温合金在550~700℃,65-120 MPa范围......
奥氏体不锈钢硬度低，使用寿命短，表面附着的钝化膜妨碍了其低温渗碳。采用电镀纯铁和氟化法对其表面进行处理，去除表面钝化膜后，500℃......
在试制S30815（1Cr21Ni11Si2NCe）含铈奥氏体耐热钢管时,技术难度大。由于该钢含铈且有上、下限控制,而铈作为主要活泼元素之一,冶炼时......
通过350MWX2台锅炉过热器、再热器的改造实践，给出了锅炉受热面改造过程中钢管材料选择及设计计算、制造、安装过程中应注意的问题......
SA213-TP304奥氏体不锈钢再热器管排冷弯成形后,按照规范要求,对其进行了固溶处理。根据产品结构及材质特殊的固溶处理要求,采取了......
介绍中厚板热处理线淬火自动控制系统。分析加热温度和控冷速度对铜的淬透性和硬度等组织性能的影响，并在生产过程中不断优化完善淬......
粗晶焊缝的超声检测一直是无损检测界的难题,而大厚度异种钢奥氏体焊缝的检测困难更大。实验研究了波型、频率、晶片和K值等工艺参......
Effect of low-frequency rotary electromagnetic-field on solidification structure of continuous casti
理解奥氏体的不锈钢的团结行为在旋转电磁地，影响低频率旋转在在水平连续的扔的奥氏体的不锈钢的团结结构上电磁地基于工业实验被调......
屏蔽泵被介质腐蚀而穿孔，介质进入屏蔽套内，又腐蚀定子线圈，造成线圈烧毁。通过水质成分分析和能谱分析．认为P-403B屏蔽套发生腐蚀开裂......
Hot deformation mechanism and microstructure evolution of an ultra-high nitrogen austenitic steel co
The flow curves of an ultra-high nitrogen austenitic steel containing niobium(Nb) and vanadium(V) were obtained by hot c......
The interaction between precipitation and recrystallization in cold deformed Fe-18Cr-12Mn-0.48N high-nitrogen austenitic......
Austenitic stainless steels are a class structural material applied in current nuclear reactors and spallation targetsas......
介绍了超超临界锅炉采用的一些高温蠕变性能、高温抗氧化性能更好的新型材料，并概述了国内用于超超临界锅炉的新材料的成分及性能，简......
本文对奥氏体中锰钢、钒强化含胞状碳硼化物奥氏体中锰钢和钛强化含胞状碳硼化物奥氏体中锰钢在高应力和低应力条件下相对耐磨性进......
Microstructuring of steel resulting in directional solidification and texturing, previously observed in various metallic......
This work concerns with the study of weldability of austenitic stainless steel 316 by using automatic tungsten gas shiel......
...
...
...
研发了2.3 t铸锭的5Cr21Mn9Ni4N（21-4N）奥氏体气阀钢轧制开坯工艺。热模拟此钢种在高温状态的抗拉强度Rm和断面收缩率Z,并根据生产设......
Impact toughness of ductile nodular cast iron loaded perpendicular to the austeniticdendrites is found to be 43% higher ......
The dynamic mechanical behaviours of super low carbon high Mo austenitic stainless steel(00Cr20Nil8Mo6CuN)during hot def......
X-ray diffraction profiles of various deformed steel 1Cr18Ni9 through stepped scanning wereobtained.By profile analysis,......
Development of Modified 304 Stainless Steel Resistant to Stress Corrosion Cracking in Chloride Envir
This was a feasibility study for a modified 304 steel resistant to stress corrosion cracking (SCC) in aqueous environmen......
通过各种试验手段,研究了20Mn2SiVB钢不同奥氏体化温度及不同冷却方式处理后其显微组织及其强度和塑性的变化,确定了最佳的热处理......
In this paper, the law of austenitic grain growth gfg is studied under different heating temperature and insulation time......
Atmospheric Corrosion Studies of Ductile Iron and Austenitic Stainless Steel in an Extreme Marine En
This paper presents the corrosion characteristics and the accompanying changes in the microstructure of unalloyed duc-ti......
Welding as a fabrication process is one of the vital production routes for most manufacturing industries. Several factor......
Strain hardening in austenitic stainless steels is modeled according to an internal state variable constitutive model. D......
Corrosion characteristic of selected ferrous metal samples (plain and alloyed ductile iron, low carbon steel and austeni......
The Phenomenon of High Hardness Values on the S-Phase Layer of Austenitic Stainless Steel via Screen
The purpose of this study is to improve the surface properties of austenitic stainless steel using the double-folded ele......
Hot-formed components are constantly exposed to hostile environments with corrosive substances. Microstructural changes ......
High nitrogen stainless steel (HNS) is a nickel free austenitic stainless steel that is used as a structural component i......
The effect of various dynamic strain aging(DSA)pre-treatment processes on pure bendingfatigue strength of an 18-8 austen......
对石油化工装置中奥氏体不锈钢情况进行介绍,及装置中的使用情况。结合在生产中装置应用存在的问题,总结了近年来对奥氏体不锈钢性......
