Prediction of Non-Cavitation Propeller Noise in Time Domain

来源 :中国海洋工程(英文版) | 被引量 : 0次 | 上传用户:wwx3572205
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The blade frequency noise of non-cavitation propeller in a uniform flow is analyzed in time domain.The unsteady loading (dipole source) on the blade surface is calculated by a potential-based surface panel method.Then the timedependent pressure data is used as the input for Ffowcs Williams-Hawkings formulation to predict the acoustics pressure.The integration of noise source is performed over the true blade surface rather than the nothickness blade surface,and the effect of hub can be considered.The noise characteristics of the non-cavitation propeller and the numerical discretization forms are discussed.
其他文献
电磁成形是一种使用脉冲电磁力快速成形的工艺.线圈是电磁成形系统中的一个重要组成部分,需要根据实际应用情况来设计.均匀螺旋线圈通常用在金属板材零件成形中.然而,对于这
在聚丙烯氰基炭纤维上电沉积Ni-Fe合金催化剂,并采用x-射线衍射和拉曼光谱方法考察其对热处理炭纤维石墨化的催化性能.结果表明:Ni-Fe合金在低温条件下对炭纤维石墨化有着优
采用水热法在180℃下反应36 h合成了具有规整八面体状的烧绿石结构La2Sn2O7:Eu3+微晶.采用XRD、TEM、SEM、EDS、FT-IR、Raman和PL对合成产物的晶体结构、颗粒尺寸、形貌和光
In the purification process of automobile exhaust, existing water plays an important role as an oxidant, which converts CO and hydrocarbons (HCs) by the water-g
在温度为300-450℃和应变速率为0.01-10 s-1的变形条件下,对Al-Zn-Mg-Cu-Zr合金(7056和7150铝合金)进行热压缩实验.结果表明:在一定的应变峰值出现后,流动应力随应变增加单调
硼酸铝晶须增强6061铝合金基复合材料中的界面反应影响其断口分形维数.该复合材料由压力铸造法制备,采用垂直剖面法分析拉伸断裂断口.当量尺度分别取3-15μm以及1-5μm时,可
A new type of Cu-La2O3 composite was fabricated by internal oxidation method using powder metallurgy. Sliding wear behavior of the Cu-La2O3 composite was studie
The neodymium trifluoroacetate complexes were synthesized and characterized by single-crystal X-ray diffraction for [Nd(CF3COO)3·Bpy·(H2O)3]Bpy (1), elemental
Polycrystalline Ndo. 75Na0.25Mn1-xCrxO3 (0≤x≤.1) samples were prepared by sol-gel method and their magnetic and electrical transport properties were investiga
采用放电等离子烧结(SPS)技术固结成形W-5.6Ni-1.4Fe(质量分数,%)混合粉末,研究不同加热速率对烧结致密化行为和微观组织演变规律的影响.结果表明,W-5.6Ni-1.4Fe合金的SPS致