超稠油耐高温降粘剂的优选及应用参数确定

来源 :辽宁化工 | 被引量 : 0次 | 上传用户:eton8816
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
针对内蒙探区锡14块超稠油从配伍性、降粘效果、热稳定性等方面入手,利用旋转测定法对乳化降粘剂进行评价,筛选出适合于锡14块超稠油的最佳降粘剂JN-02,330℃高温处理后仍有较好的降粘性能。并对应用参数进行考察,降粘剂最优添加质量分数为1.5%,乳化温度对降粘效果有较大影响,锡14块超稠油的有利乳化温度在80℃以上。 Aiming at the compatibility of Sn14 super heavy oil in Inner Mongolia Exploration Area, the spinodal viscosity reducer was evaluated by rotation assay from the aspect of compatibility, viscosity reduction and thermal stability. Viscosity reducing agent JN-02, after 300 ℃ high temperature treatment there is still a better viscosity-lowering properties. The optimum parameters of the viscosity reducer were 1.5%. The emulsifying temperature had a significant effect on the viscosity reducing effect. The favorable emulsifying temperature of the 14 super heavy oil was above 80 ℃.
其他文献
通过对绿色植被近红外区反射光谱的系统分析,充分证明O-H决定植被在1450nm和1940nm附近的光谱特征,在此基础上,设计并制备了4种层间含O-H的新型光谱模拟材料Mg-Al-X-LDH(X为N
MQB是大众汽车集团最新的横置发动机模块化平台Modular Querbaukasten的简称。该模块化平台可用于生产多个级别的车型,未来将取代目前的PQ25、PQ35和PQ46平台,在大众、奥迪、斯柯达和西雅特这4个品牌中得到极为广泛的应用,有望衍生出多达60款新车。  MQB的最大亮点在于,除了标准化的车头布置不可变以外,车辆的轴距、轮距、车轮尺寸、前后悬尺寸均可随意调整,进而衍生出不同的车身