A POF Based Breakdown Method for LED Lighting Color Shift Reliability

来源 :第十二届中国国际半导体照明论坛 | 被引量 : 0次 | 上传用户:houjhz
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Color shift mechanism of LED lighting is complex due to its much more comprehensive structure,generally composed of LED die,phosphor,silicone,reflector,diffusers,and so on,each of them may contribute to the color shift during operation.This paper proposed a breakdown method for the color shift study and investigation on the LED based luminaire level products.For the downlight investigated in this paper,the LED packages part has the most important contribution in color shift,higher than 1sdcm even under the normal operation conditions of room temperature.Both humidity and temperature conditions can be used to accelerate the color shift of the mid power 5630 package and the humidity has a stronger acceleration.The reflective part contributes far less than 1 sdcm even when the reflective material crumbles after 4000hours of humidity test under certain conditions.
其他文献
This paper focus our attention on the deep considerations for LED package technology.The research includes the following content: (i) the influence of binding force between the chip and substrate,the
We have applied v-pits to serve as current tunneling channels to laterally inject the carriers into two sets of InGaN/GaN MQWs.By properly adjusting the v-pits structure and configuration of two sets
会议
A Si-doped GaN films was,grown on 4H-SiC by MOCVD.It was found that the compressively strained layer of the film can be relaxed and surface structural quality can be improved by increasing the thickne
Efficiency droop remains a significant problem to be overcome if the performance of LEDs for solid state lighting is to be improved.As more cost effective substrates such as silicon wafers are used on
会议
White light emitting diodes (LEDs) have been regarded as the most promising light sources of new lighting technology due to the properties of high efficiency,energy saving,long lifetime and environmen
会议
We showed a detailed thermal simulation of a high power flip-chip packaged LED,simulation results show that the junction temperature of the LED is more sensitive to the adhesive layer material between
The drive to increased electrical currents input to achieve high lumen output for High Brightness Light Emitting Diode (HB LED) has led to a series of thermal problems.Hence,thermal management is a ke
会议
high-power green LEDs in mass-production is reaching a new WPE (wall-plug-efficiency) level of 35%,and this progress results from both band- and strain-engineering in the active multiple-quantum-well
By using a blue light source converted by phosphors to obtain white light emission,phosphor-converted white light emitting diodes (pc-white LEDs) are becoming as one of substitutes of traditional gene
会议
This paper reviews the most relevant mechanisms responsible for the gradual and catastrophic failure of InGaN-based light emitting diodes,for application in general lighting.Based on recent results ob
会议