【摘 要】
：
The origin of surface engineering of solids is to properly control the crystal growth process during carious chemical reaction systems,which strictly follows both thermodynamic and kinetic limitations
【机 构】
：
State Key Laboratory of Fine Chemicals,Department of Materials Science and Chemical Engineering,Scho
【出 处】
：
Fifth International Conference on Surface Engineering(第五届表面工
论文部分内容阅读
The origin of surface engineering of solids is to properly control the crystal growth process during carious chemical reaction systems,which strictly follows both thermodynamic and kinetic limitations.Microscopically,the crystal growth and its morphology result from an interplay of crystallographic anisotropy and growth kinetics by means of interfacial processes [1-6].On the basis of crystallographic characteristics of various functional materials such as ZnO,Cu2O,ZnS,BaCO3,magnesium salts,copper salts,and lithium niobate,a fine chemicalroute strategy is employed to fabricate solid surface at the microscale.
其他文献
Increasingly more demanding and very stringent operating conditions envisioned for future mechanical and tribological systems will certainly require new materials,coatings (films) and surface technolo
The nanostructured titanium nitride (TiN) coatings with thick titanium transition-layer was deposited on the surface of occluders at relatively lower temperature using filtered cathode arcing techniqu
The paper presents a simple chemical treatment to provide various non-metallic substrates such as polypropylene and polyethylene with in vitro bioactivity or ability to deposit apatite in DMEM/SBF.Ana
As magnesium is an essential element for the human body,magnesium alloys are expected to be promising implanted materials despite their lower corrosion resistance.The most potential advantages of magn
Repeated impact test is an appropriate way to evaluate coating properties of metal cutting tools since the cyclic impact loading applied in the test simulates the interrupted cutting process.For hard
Ever-increasing cutting speeds and lubrication-free machining are major driving forces for the development of a new generation of coatings.This study has been directed at developing new nano-multilaye
CrN coatings were deposited on cemented carbide substrates by filtered cathodic vacuum arc technique (FCVA).The effect of different deposition parameters:nitrogen partial pressure,substrate-bias volta
Hard chromium deposits were prepared from a trivalent chromium plating bath as an alternative to conventional hexavalent chromium deposits.The influences of bath composition on the trivalent chromium
Aluminized coatings prepared on nickel-based superalloys can provide good protection against high temperature oxidation and hot corrosion.This study investigated the simple aluminized and silicon-alum
The electroless silver plating procedure was used to prepare the silver-coated flake graphite as the filler of the conductive adhesive.The properties of the silver coated graphite (conductivity) as we