From conception to pilot verification for coal pyrolysis in internal-enhanced fixed bed reactor

来源 :The 7th Sino-US Conference of Chemical Engineering(第7届中美化学工程 | 被引量 : 0次 | 上传用户:lijb2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Pyrolysis provides an efficient way to use coal volatiles, the inherent gas, liquid and structured chemicals containing in coal. For 100 years the scientists and engineers worldwide in the area have worked on understanding coal pyrolysis and developing the technical processes that can run steadily in commercial scale to produce liquid tar with high yield and low contents of dust (e. g. , <0. 5 wt. %) and heavy components (e. g. , <30 wt. %). Although lots of pilot verifications and industrial demonstrations have been performed, there is unfortunately not such a kind of pyrolysis technologies commercially available, especially for treating small-size powder coal.
其他文献
Water crisis is a world wide problem, it is particularly true in China. This is the motivation of more and more professors and experts in the process systems engineering field jointed the studies of
Modeling research could provide the support of theory for scale-up and design of F-T (Ficher-Tropsch) synthesis slurry reactor. In this work, a reasonable double bubble model for F-T Slurry bubble co
Coal is a material with lower H/C atom ratio (about 0. 8), but liquid fuel is a product with higher H/C atom ratio (about 2. 0). Therefore, coal to liquid fuels is a hydrogen adding and carbon reject
A revolutionary molecule-based characterization methodology is developed for correlation and prediction of assays and properties for crude oil and petroleum fractions. From readily accessible crude o
Continuum process modeling of point defect and impurity aggregation during silicon crystal growth and wafer annealing has led to significant contributions toward understanding and improvement of indus
Under the EPA guidelines, the open air combustion systems are assumed to have a high destruction and removal efficiency (DRE) and combustion efficiency (CE) if the flares are operated in compliance wi
Even at the continuum level, computation of melt crystal growth problems present a significant technical challenge, requiring the integration of a large-scale furnace model with a strongly-coupled, mu
In this talk we use three methods to investigate the problem of a vapor bubble in a liquid layer on the surface of a solid of much higher thermal conductivity than the liquid and of finite thickness h
Light olefins including propylene and ethylene, as intermediate chemical materials, are of great importance in chemical industries. Traditionally light olefins are produced from oil via naphtha crack
Current trends in refinery modeling are largely based on lumped kinetic models. Each individual reactor is modeled independently, relying on lumping decisions that were chosen for that specific react